Westinghouse · Ceiling fan · Large airflow
Westinghouse Jax 7861400 56-inch Ceiling Fan
Tap a photo to enlarge it; use the arrow keys to move between photos.
Photos: Amazon product listing ↗ · refreshed Sep 16, 2026
Westinghouse Jax 7861400 is a 56-inch indoor, downrod-only ceiling fan with five-speed wall control and 4,833 CFM listed at high speed.
What works
- Included five-speed wall control and 12-inch downrod
What doesn't
- Indoor-only, downrod-only installation
Who it's for
Good fit
- Large indoor rooms with suitable downrod clearance
Look elsewhere if
- Outdoor locations or ceilings that cannot leave 10 feet below the blades
Exact model
Westinghouse identifies 7861400 as the brushed-nickel Jax with three steel blades. Its manufacturer specification sheet lists 4,833 CFM at high speed, 196 RPM, 56 W, and 0.50 A. The included wall control operates five speeds. These are manufacturer values for this model, not inferred catalog data.
Fit and use
The Jax is indoor and downrod only. It includes a 12-inch downrod, allows a ceiling slope up to 24 degrees, and requires at least 10 feet from the floor to the lowest blade edge. Allow for the downrod and fan assembly when checking the ceiling height. Westinghouse gives a limited lifetime motor warranty and two years on other parts; check which term applies to the part involved. Its airflow is for circulation, not ventilation or exhaust.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
What mounting method and hardware does the exact unit require?
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Blade diameter: 56 inManufacturer source ↗
Electrical match
Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.
- Current: 0.5 AManufacturer source ↗
- Power draw: 56 WManufacturer source ↗
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 4,833 CFMManufacturer source ↗
Location requirements
Does the site require an environmental rating or guard? Neither is listed here.
Put 4,833 CFM in context
The Westinghouse Jax 7861400 56-inch Ceiling Fan has a listed airflow of 4,833 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 122× | 29 s |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 73× | 49 s |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 20× | 3 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 3.6× | 17 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on September 14, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 7 listed specifications
- Airflow (high): Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Blade diameter: Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Max speed: Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Power draw: Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Current: Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Finish: Westinghouse Jax 7861400 specification sheet · checked Sep 15, 2026 · 7861400 Energy Information and Specifications — “56 in Brushed Nickel Finish; Airflow (CFM) when operated at high speed 4833; RPM (High) 196; Amp (High) 0.50; Watts (High) 56; Down Rod Only.”
- Speeds: Westinghouse Jax 7861400 product page · checked Sep 15, 2026 · Features and Benefits — “Wall control included; five-speed wall control provides convenient customized comfort.”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
Similar ceiling fans
See all →
Ceiling fan · Airmaster
Airmaster Fan 20630K 24" Ceiling Mount Fan 1/4 HP 5739 CFM
- 5,739 CFM
- 24 in
Ceiling fan · Fanimation
Fanimation Odyn FPD8148BN 84-inch Ceiling Fan
- 10,104 CFM
- 84 in
Like-for-like comparison
See this fan against a close category alternative.
Compare the listed specifications and the practical tradeoffs in one view.
Open comparison