PATTERSON · Wall-mount fan · Medium airflow
Patterson H14B Yoke-Mount Fan
- 2,600 CFMon high
- 14-inchhead
- 1/4 HPmotor
Amazon shows the current price, delivery and seller. As an Amazon Associate we earn from qualifying purchases.
Specs cited from Manufacturer source ↗Photos: Amazon listing ↗ · refreshed Oct 31, 2026
Patterson H14B is a verified current yoke-configuration high-velocity circulation fan with a 14-inch propeller, 2,600 CFM, and 1/4 HP listing.
What works
- 2,600 CFM on high from a 14-inch head
- 1/4 HP motor
What doesn't
- Yoke configuration does not establish a wall, ceiling, or other installed mounting method
Who it's for
Good fit
- Targeted industrial air circulation where the specified three-phase B configuration can be confirmed
Look elsewhere if
- Outdoor-air ventilation or exhaust sizing without a separate engineered air path
A good fit for your job? Check the current price and delivery.
See price on AmazonVerified current configuration
Patterson’s current product JSON identifies SKU H14B as 14" / B: 208-230V/460V (No Cord) / Yoke (Standard). That exact SKU supports this record’s current yoke configuration and B-series electrical description. The older listing title says 230/460V; the current manufacturer wording instead says 208–230V/460V. Confirm the nameplate and supplied electrical configuration before purchase. No numeric voltage is published here because the manufacturer lists a multi-voltage configuration.
Published fan performance
The manufacturer’s 14-inch size section lists a 14-inch propeller, 2,600 CFM, and 1/4 HP. Patterson does not state a static-pressure test condition next to that CFM value, so treat it as a listed circulation rating rather than delivered ventilation flow. The yoke option identifies the product form but does not prove a wall, ceiling, or other installation method; structural support and fastener requirements remain installation-specific.
Buying limits
The B configuration is listed without a cord. This is a high-velocity circulation fan, not a complete outdoor-air, supply, or exhaust system. Plan electrical connection, guard clearance, mounting hardware, and any ventilation path separately.
Sources and alternatives
The manufacturer specification page provides the performance figures; its current model-variant data identifies the model and electrical option. Compare mounted industrial fans by their actual propeller diameter, supplied hardware, and electrical configuration. A higher CFM figure alone does not establish that a different model will fit the installation.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
What mounting method and hardware does the exact unit require?
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Blade diameter: 14 inManufacturer source ↗
Electrical match
What voltage and connection requirements does the exact unit specify?
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 2,600 CFMManufacturer source ↗
Location requirements
Does the site require an environmental rating or guard? Neither is listed here.
Put 2,600 CFM in context
The Patterson H14B Yoke-Mount Fan has a listed airflow of 2,600 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 66× | 55 s |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 39× | 1.5 min |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 11× | 5.5 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 2× | 31 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on October 31, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 3 listed specifications
- Blade diameter: Patterson High-Velocity Fans · checked Sep 15, 2026 · 14-inch size section, FEATURES propeller row and SPECS CFM/HP rows — “Propeller: 14” Diameter, 3-Blade Galvalum, 37°; CFM: 2600; HP: 1/4.”
- Blade diameter: Patterson High-Velocity Fans product JSON · checked Sep 15, 2026 · product.variants[] record with sku `H14B` — “SKU H14B: 14" / B: 208-230V/460V (No Cord) / Yoke (Standard).”
- Airflow (high): Patterson High-Velocity Fans · checked Sep 15, 2026 · 14-inch size section, FEATURES propeller row and SPECS CFM/HP rows — “Propeller: 14” Diameter, 3-Blade Galvalum, 37°; CFM: 2600; HP: 1/4.”
- Airflow (high): Patterson High-Velocity Fans product JSON · checked Sep 15, 2026 · product.variants[] record with sku `H14B` — “SKU H14B: 14" / B: 208-230V/460V (No Cord) / Yoke (Standard).”
- Motor: Patterson High-Velocity Fans · checked Sep 15, 2026 · 14-inch size section, FEATURES propeller row and SPECS CFM/HP rows — “Propeller: 14” Diameter, 3-Blade Galvalum, 37°; CFM: 2600; HP: 1/4.”
- Motor: Patterson High-Velocity Fans product JSON · checked Sep 15, 2026 · product.variants[] record with sku `H14B` — “SKU H14B: 14" / B: 208-230V/460V (No Cord) / Yoke (Standard).”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
Similar wall-mount fans
See all →
Wall-mount fan · Patterson Fan
Patterson 292597 Truck Cooler Fan
- 2,600 CFM
- 14 in
- 1/4 HP


Wall-mount fan · Airmaster
Airmaster 20-Inch Washdown Wall-Mount Fan
- 2,650 CFM
- 20 in




