Tornado · Wall-mount fan · Medium airflow
Tornado 16-Inch Pro Series Wall Fan
- 2,850 CFMon high
- 16-inchhead
- 3speeds
- 1/8 HPmotor
Amazon shows the current price, delivery and seller. As an Amazon Associate we earn from qualifying purchases.
Specs cited from Manufacturer source ↗ · Amazon listing ↗Photos: Amazon listing ↗ · refreshed Oct 31, 2026
Tornado 16-Inch Pro Series Wall Fan is a wall-mounted fan matched by the manufacturer as Tornado HI-FAN-16WMPRO-WR-1P; the listing states 16-inch, up to 2,850 CFM.
What works
- 2,850 CFM on high from a 16-inch head
- 3 speeds, down to 2,300 CFM on low
- 1/8 HP motor on standard 120 V power
What doesn't
- It needs a structural mounting point and is less flexible once installed.
Who it's for
Good fit
- fixed airflow where keeping the floor clear matters
Look elsewhere if
- Locations that cannot meet the mounting and clearance needs
A good fit for your job? Check the current price and delivery.
See price on AmazonThe manufacturer match identifies Tornado HI-FAN-16WMPRO-WR-1P and supports this listing variant. It fits fixed airflow where keeping the floor clear matters. It needs a structural mounting point and is less flexible once installed. See the manufacturer product page for current installation details.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
Does the planned location suit the listed wall mounting, with the required support, clearance, and service access?
- Mounting: wallAmazon listing ↗
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Blade diameter: 16 inAmazon listing ↗
Electrical match
Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.
- Voltage: 120 VManufacturer source ↗
- Current: 0.95 AManufacturer source ↗
- Power draw: 90 WManufacturer source ↗
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 2,850 CFMManufacturer source ↗
Location requirements
Does the site require an environmental rating or guard? Neither is listed here.
Put 2,850 CFM in context
The Tornado 16-Inch Pro Series Wall Fan has a listed airflow of 2,850 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 72× | 50 s |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 43× | 1.4 min |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 12× | 5.1 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 2.1× | 28 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on October 31, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 12 listed specifications
- Blade diameter: Amazon product listing · checked Sep 14, 2026
- Mounting: Amazon product listing · checked Sep 14, 2026
- Airflow (high): Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “Air delivery with 3 speed settings 2850/2500/2300 CFM.”
- Airflow (medium): Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “Air delivery with 3 speed settings 2850/2500/2300 CFM.”
- Airflow (low): Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “Air delivery with 3 speed settings 2850/2500/2300 CFM.”
- Speeds: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “3 speed settings”
- Current: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “0.95 AMPS, 1500 RPM, 2850 CFM, 120V, 90 Watts, 60 Hz, 1/8 HP.”
- Max speed: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “0.95 AMPS, 1500 RPM, 2850 CFM, 120V, 90 Watts, 60 Hz, 1/8 HP.”
- Voltage: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “0.95 AMPS, 1500 RPM, 2850 CFM, 120V, 90 Watts, 60 Hz, 1/8 HP.”
- Power draw: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “0.95 AMPS, 1500 RPM, 2850 CFM, 120V, 90 Watts, 60 Hz, 1/8 HP.”
- Motor: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “0.95 AMPS, 1500 RPM, 2850 CFM, 120V, 90 Watts, 60 Hz, 1/8 HP.”
- Cord length: Tornado HI-FAN-16WMPRO-WR-1P product page · checked Sep 23, 2026 · Product description — “Extra-long 6.6 FT SJT-R power cord.”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
Similar wall-mount fans
See all →- NewAirProduct photo coming soon

Wall-mount fan · Airmaster
Airmaster 20-Inch Washdown Wall-Mount Fan
- 2,650 CFM
- 20 in


Wall-mount fan · Patterson Fan
Patterson 292597 Truck Cooler Fan
- 2,600 CFM
- 14 in
- 1/4 HP





