Lasko · Floor fan · Medium airflow
Lasko 2265QM 20-Inch High Velocity Floor Fan
Tap a photo to enlarge it; use the arrow keys to move between photos.
Photos: Amazon product listing ↗ · refreshed Sep 16, 2026
Lasko 2265QM is a 20-inch, three-speed floor fan that converts to wall mounting with its included QuickMount bracket and is listed at up to 2,500 CFM.
What works
- Lasko documents the exact 2265QM model, three speeds, pivoting head, and included wall bracket
- Current page publishes voltage, dimensions, weight, color, and one-year warranty
What doesn't
- The current product page describes indoor use and does not provide a static-pressure performance point
- It is a circulation fan; high CFM does not establish outdoor-air exchange
Who it's for
Good fit
- Indoor circulation where the same 20-inch fan may be used on its floor stand or on the included wall bracket
Look elsewhere if
- Outdoor placement or a project that needs an exhaust fan with a designed discharge path
- A decision based on the older 3,460-CFM claim rather than Lasko's current 2,500-CFM page
A floor fan that can become a wall-mounted unit
Lasko's current 2265QM product page names this as the 20-inch high-velocity floor fan with wall-mount option. The page says its QuickMount system converts the fan from the floor stand to a wall-mounted position using the included bracket. It also specifies a pivoting head, three speeds, a silver finish, and indoor use. That dual-format design is the central reason to consider it: the same unit can serve an open floor location or a wall position after the appropriate bracket placement is planned.
The manufacturer now lists up to 2,500 CFM, not the 3,460 CFM that appeared in the legacy record. The 2,500 figure is the current official value retained here. Lasko also lists 120 V, 16.0 lb, 22.00 inches high, 22.00 inches wide, 12.63 inches deep, and a one-year warranty. Its current draws and watts are given as ranges, so this page does not publish a single amps or watts number.
Keep circulation separate from exhaust planning
The pivoting head and floor/wall choices support directed indoor circulation. They do not create an exhaust route. A fan moving up to 2,500 CFM can redistribute room air effectively, while the amount of outdoor air exchanged depends on a separate inlet/outlet arrangement and other installation factors. Lasko does not publish a static-pressure curve for this product, so the CFM claim should not be treated as a ducted-flow calculation or a site-specific ventilation result.
The 2265QM is a more flexible placement choice than a fixed shutter exhaust fan when the goal is indoor circulation. For a portable drum format with a larger published airflow figure, compare the Hurricane HGC736485 after checking its footprint and cord length. For a true discharge-path format, browse industrial exhaust fans. This assessment uses manufacturer documentation only; it makes no independent noise, durability, or airflow-distance claims.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
Does the planned location suit the listed floor, wall mounting, with the required support, clearance, and service access?
- Mounting: floor, wallManufacturer source ↗
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Dimensions (W × H × D): 22 × 22 × 12.63 inManufacturer source ↗
- Blade diameter: 20 inManufacturer source ↗
- Weight: 16 lbManufacturer source ↗
Electrical match
Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.
- Voltage: 120 VManufacturer source ↗
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 2,500 CFMManufacturer source ↗
Location requirements
Does the site require an environmental rating or guard? Neither is listed here.
Put 2,500 CFM in context
The Lasko 2265QM 20-Inch High Velocity Floor Fan has a listed airflow of 2,500 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 63× | 57 s |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 38× | 1.6 min |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 10× | 5.8 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 1.9× | 32 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on September 14, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 10 listed specifications
- Airflow (high): Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Blade diameter: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Speeds: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Voltage: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Weight: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Dimensions (W × H × D): Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Tilting head: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Mounting: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Warranty: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
- Finish: Lasko 20-Inch High Velocity Floor Fan — 2265QM · checked Sep 15, 2026 · Product overview, features, and specifications — “Model 2265QM: up to 2,500 CFM; QuickMount converts the fan from a floor stand to wall-mounted position using the included bracket; pivoting head; 3 speeds; 120 V; 22.00 in high × 22.00 in wide × 12.63 in depth; 16.0 lb; silver; one-year warranty.”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
Similar floor fans
See all →
Floor fan · Airmaster
Airmaster 78972 Industrial Yoke Mount Air Circulator
- 2,966 CFM
Like-for-like comparison
See this fan against a close category alternative.
Compare the listed specifications and the practical tradeoffs in one view.
Open comparison