iLiving · Wall-mount fan · Large airflow
iLIVING ILG8F20 20-Inch Floor and Wall Fan
Tap a photo to enlarge it; use the arrow keys to move between photos.
Photos: Amazon product listing ↗ · refreshed Sep 16, 2026
The iLIVING ILG8F20 is a 20-inch indoor fan documented for floor or wall mounting, with 5,750 CFM listed by iLIVING.
What works
- The exact product page names it as a floor-and-wall model and lists 5,750 CFM
- Its manual documents 120V, 120W, 1.0A operation and three speeds
What doesn't
- The owner manual says not to operate it outdoors
- No published CFM is provided for the individual low or medium settings
Who it's for
Good fit
- Indoor circulation where floor placement or the documented wall-mount format fits the layout
- A work area that can use three manual speed settings and head tilt
Look elsewhere if
- Outdoor operation
- Removing contaminants without a designed capture or exhaust system
A dual-format fan with an indoor limit
The iLIVING ILG8F20 product page identifies this exact model as a 20-inch heavy-duty floor and wall-mount fan and lists 5,750 CFM. The linked owner manual supplies the electrical and operating details: 120V, 120W, 1.0A, and low, medium, and high settings. The source pairing supports the model identity instead of assuming that another iLIVING 20-inch fan shares its specifications.
The useful decision is format. Floor placement can make sense when the work layout changes, while the wall option may free floor space when the manual's support and installation conditions are met. The manual also describes tilting the head to change airflow direction. Neither configuration changes the basic function: published CFM is a manufacturer figure for comparison, not a promised air speed at a person or a room-coverage guarantee. The documents reviewed do not list CFM at low or medium speed.
Do not extend its location rating
The manual plainly says this model should not be operated outdoors. That is a direct limit, so do not infer patio, wet-area, or exterior suitability from the fan's metal construction or from a retailer description. Check the current manual before choosing a mounting point, power source, or cable route.
For ordinary circulation, place and tilt the fan to create the needed air movement across the work zone. For welding smoke, sanding dust, solvent vapor, or similar contaminants, cross-room circulation is not source capture. Use appropriate local capture or designed ventilation for that job.
See other industrial wall-mount fans and industrial floor fans for formats with documented installation details. The CFM calculator can examine a room-flow assumption, but it does not turn a listed CFM value into installed performance. This is a manufacturer-document review, not hands-on testing.
Verdict
The ILG8F20 suits an indoor circulation job where either floor placement or a properly installed wall position works. Decide the location from the manual and work layout rather than from the headline CFM alone.
Questions people ask
- Can the ILG8F20 be installed on a wall?
- Yes. The manufacturer identifies it as a floor-and-wall fan; follow the model-specific owner manual for the wall installation.
- Is the ILG8F20 an outdoor fan?
- No. Its owner manual says the fan should not be operated outdoors.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
Does the planned location suit the listed floor, wall mounting, with the required support, clearance, and service access?
- Mounting: floor, wallManufacturer source ↗
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Blade diameter: 20 inManufacturer source ↗
Electrical match
Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.
- Voltage: 120 VProduct manual ↗
- Current: 1 AProduct manual ↗
- Power draw: 120 WProduct manual ↗
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 5,750 CFMManufacturer source ↗
Location requirements
Do the documented location and guard details match the conditions and rules at the installation site? Check the manufacturer instructions for the exact configuration.
- Outdoor rated: NoProduct manual ↗
Put 5,750 CFM in context
The iLIVING ILG8F20 20-Inch Floor and Wall Fan has a listed airflow of 5,750 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 145× | 25 s |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 87× | 41 s |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 24× | 2.5 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 4.3× | 14 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on September 15, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 10 listed specifications
- Airflow (high): iLIVING ILG8F20 product page · checked Sep 15, 2026 · Product page — “5750 CFM High Velocity.”
- Blade diameter: iLIVING ILG8F20 product page · checked Sep 15, 2026 · Product page — “20 Inch Heavy Duty Floor and Wall Mount Fan.”
- Speeds: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “LOW, MEDIUM, HIGH.”
- Power draw: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “ILG8F20: 120V 60Hz, 120W, 1.0A.”
- Current: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “ILG8F20: 120V 60Hz, 120W, 1.0A.”
- Voltage: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “ILG8F20: 120V 60Hz, 120W, 1.0A.”
- Tilting head: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “Tilting the fan head upward allows it to pull air from the floor.”
- Mounting: iLIVING ILG8F20 product page · checked Sep 15, 2026 · Product page — “20 Inch Heavy Duty Floor and Wall Mount Fan.”
- Outdoor rated: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “This fan should not be operated outdoors.”
- Warranty: iLIVING ILG8F20 owner manual · checked Sep 15, 2026 · Specifications or operating instructions — “1-YEAR LIMITED COMPONENT WARRANTY.”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
Similar wall-mount fans
See all →
Wall-mount fan · BILT HARD
BILT HARD 20-Inch 5,400 CFM Wall-Mount Fan
- 5,400 CFM
- 20 in
