iLiving ILG8P30-72 Commercial Pedestal Fan

What the manufacturer documents

The iLIVING ILG8P30-72 product page names this model as a 30-inch commercial pedestal fan and lists 7,261 CFM. Its linked owner manual identifies it as an air circulator with a pedestal base. That exact-model match matters: it avoids treating a similarly sized iLIVING fan or a marketplace variant as the same product.

For electrical planning, the reviewed documents conflict. The manual lists 120VAC, 1.91A, and 220W, while the current product page lists 120V, 220W, and operating amps of 3.4/2.0. The sources do not explain the difference, so this record omits structured amperage rather than selecting or combining the figures. The manual also describes a pull chain with low, medium, and high settings, plus head tilt; the product page lists a 9-foot cord.

Fit the fan to the air path

Start with where people need moving air, then verify that the pedestal location leaves the guard, controls, and cord route usable under the owner manual. Head tilt can aim the discharge, but it cannot create an intentional intake-and-exhaust path. A circulation fan may improve air movement around people and equipment; it does not replace local capture where a documented control method is required.

The manual is explicit about water and moisture limits: do not expose this model to water or rain, and do not use it in wet atmospheres; it also says not to operate it in or near a window because rain may create an electrical hazard. It does not supply an outdoor rating. This record therefore recommends a dry location without treating those limits as a blanket manufacturer ban on every outdoor setting or as permission for a covered setting. Review the current instructions before installation because the manual controls the permitted setup.

Compare it with other industrial pedestal fans on documented control, electrical, and location details. The CFM calculator can help examine a stated room-flow target, but it cannot predict this fan's delivered airflow in a furnished space. This assessment is based on manufacturer documentation, not hands-on testing.