Exhaust fan comparison

iPower 12 Inch Wall Mounted Shutter Exhaust Fan vs Maxx Air IF14UPS 14-Inch Exhaust Fan

Compare the product details currently available for two fans in the same category. Start with installation fit, then check power, size, controls, and airflow.

Buying checks

What separates these two fans

Start with the details that affect installation and use. Each point below uses a documented value or says when a detail is not documented.

  • Check the circuit and nameplate

    iPower 12 Inch Wall Mounted Shutter Exhaust Fan: not documented. Maxx Air IF14UPS 14-Inch Exhaust Fan: Voltage: 120 V; Current: 2.65 A; Power draw: 310 W; Motor: 1/5 HP. Match the documented requirements to the intended circuit, then confirm the installed unit’s nameplate.

  • Measure the space and support

    iPower 12 Inch Wall Mounted Shutter Exhaust Fan: not documented. Maxx Air IF14UPS 14-Inch Exhaust Fan: Blade diameter: 14 in; Dimensions (W × H × D): 20.4 × 20.4 × 12.75 in; Weight: 27 lb. Use the dimensions and weight that are documented to check clearance, support, and service access.

  • Compare airflow at the same operating point

    iPower 12 Inch Wall Mounted Shutter Exhaust Fan: not documented. Maxx Air IF14UPS 14-Inch Exhaust Fan: Airflow (high): 1,400 CFM. Check that the ratings describe the same operating point, then account for placement and installation losses.

  • Match the controls to the location

    iPower 12 Inch Wall Mounted Shutter Exhaust Fan: not documented. Maxx Air IF14UPS 14-Inch Exhaust Fan: OSHA-compliant guard: Yes. Check the location’s noise, direction, weather, and guard requirements against the details that are documented.

Consider this option if

iPower 12 Inch Wall Mounted Shutter Exhaust Fan

The fit details that would separate these options are not documented here. Check the product page and manufacturer material before deciding.

Consider this option if

Maxx Air IF14UPS 14-Inch Exhaust Fan

Its documented electrical details (Voltage: 120 V; Current: 2.65 A; Power draw: 310 W; Motor: 1/5 HP) suit the intended circuit. Confirm the installed unit’s nameplate.

Specifications

See the listed details side by side

“Not listed” means this catalog has no value. Inferred values are marked so they are not mistaken for confirmed specifications.

Every available detail is grouped by the question it helps answer. Use a manufacturer page, manual, or product listing link to check the original source.

Showing 15 of 15 available specification rows

Swipe across the table to see every fan

Listed specifications for the selected fans, grouped by decision area.
SpecificationiPower 12 Inch Wall Mounted Shutter Exhaust FanMaxx Air IF14UPS 14-Inch Exhaust Fan
Airflow & speedListed output and speed settings. Compare ratings only under the same test conditions.
Airflow (high)940 CFMManual entrySource not recorded1,400 CFMListedManufacturer page
Max speed1,600 RPMInferred — not verifiedSource not recorded1,130 RPMListedManufacturer page
Speeds3Inferred — not verifiedSource not recorded1ListedManufacturer page
Mounting & sizePhysical fit, support method, clearance, and handling details.
Blade diameter12 inManual entrySource not recorded14 inListedManufacturer page
Dimensions (W × H × D)15 × 7.9 × 15 inInferred — not verifiedSource not recorded20.4 × 20.4 × 12.75 inListedManufacturer page
Weight8.5 lbInferred — not verifiedSource not recorded27 lbListedManufacturer page
Cord lengthNot listed7.5 ftListedManufacturer page
Electrical & motorMatch these figures to the intended circuit and installation requirements.
MotorNot listed1/5 HPListedManufacturer page
Power draw60 WInferred — not verifiedSource not recorded310 WListedManufacturer page
CurrentNot listed2.65 AListedManufacturer page
Voltage120 VInferred — not verifiedSource not recorded120 VListedManufacturer page
Comfort, controls & dutyListed operation, environmental, and service details.
Outdoor ratedYesInferred — not verifiedSource not recordedNot listed
OSHA-compliant guardNot listedYesListedManufacturer page
WarrantyNot listed1 yearListedManufacturer page
FinishSilverInferred — not verifiedSource not recordedMillListedManufacturer page