XPOWER · Air mover · Medium airflow
XPOWER X-34AR Professional Sealed Motor Axial Fan
Tap a photo to enlarge it; use the arrow keys to move between photos.
Photos: Amazon product listing ↗ · refreshed Sep 16, 2026
The XPOWER X-34AR is a 1/4 HP axial air mover with listed 1,720 CFM airflow, variable speed, and an included rotating rack.
What works
- Listed 1,720 CFM airflow
- Built-in outlets for daisy chaining
What doesn't
- Verify the current outlet load guidance before connecting multiple units
Who it's for
Good fit
- Drying or circulation work that benefits from a rack with 360-degree rotation
Look elsewhere if
- Jobs that require a confirmed fixed airflow setting rather than variable control
The XPOWER X-34AR combines variable airflow with a sealed motor and a rack for directional adjustment. The exact Amazon listing has the current package details.
Before you buy
Installation and buying checks
Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.
Mounting and support
What mounting method and hardware does the exact unit require?
Clearance and handling
Do the listed physical details leave enough clearance for installation, adjustment, and service?
- Dimensions (W × H × D): 9.4 × 19.2 × 18.6 inManufacturer source ↗
- Weight: 16.1 lbManufacturer source ↗
Electrical match
Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.
- Voltage: 115 VManufacturer source ↗
- Current: 1.6 AManufacturer source ↗
Airflow at the job
Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?
- Airflow (high): 1,720 CFMManufacturer source ↗
Location requirements
Does the site require an environmental rating or guard? Neither is listed here.
Put 1,720 CFM in context
The XPOWER X-34AR Professional Sealed Motor Axial Fan has a listed airflow of 1,720 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.
| Room | Size | Nominal room volumes / hour | Nominal pass interval |
|---|---|---|---|
| One-car garage | 22 × 12 × 9 ft · 2,376 ft³ | 43× | 1.4 min |
| Two-car garage | 22 × 20 × 9 ft · 3,960 ft³ | 26× | 2.3 min |
| Workshop | 40 × 30 × 12 ft · 14,400 ft³ | 7.2× | 8.4 min |
| Warehouse bay | 100 × 50 × 16 ft · 80,000 ft³ | 1.3× | 47 min |
A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.
Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.
Listing details
What we know about this listing
Listing data was imported on September 15, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.
Sources for 7 listed specifications
- Airflow (high): XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Rated Airflow | 1,720 CFM”
- Motor: XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Motor | 1/4 HP”
- Current: XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Power | 1.6 A”
- Voltage: XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Volts / Cycle | 115V / 60 Hz”
- Weight: XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Unit Weight (lbs) | 16.1”
- Dimensions (W × H × D): XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Unit Dimensions (L x W x H) | 18.6″ x 9.4″ x 19.2″”
- Cord length: XPOWER X-34AR Professional Sealed Motor Axial Fan · checked Sep 15, 2026 — “Cord Length | 20 ft”
Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.
