XPOWER · Air mover · Medium airflow

XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp

XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp
  • XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp, view 2
  • XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp, view 3
  • XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp, view 4
  • XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp, view 5
  • XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp, view 6
  • 2,980 CFMon high
  • 3speeds
  • 1/2 HPmotor
See price on Amazon

Amazon shows the current price, delivery and seller. As an Amazon Associate we earn from qualifying purchases.

Is 2,980 CFM enough for my room?Compare this fan

Specs cited from Manufacturer source ↗Photos: Amazon listing ↗ · refreshed Oct 31, 2026

The XPOWER P-630HC is a 1/2 HP, three-speed centrifugal air mover with a telescopic handle, wheels, and a carpet clamp.

What works

  • 2,980 CFM rated airflow on high
  • 3 speed settings
  • 1/2 HP motor on standard 115 V power
  • 1-year warranty
  • 20-ft power cord

Who it's for

Good fit

  • Drying work that benefits from moving the unit on wheels and securing a carpet edge

Look elsewhere if

  • Comparisons based on a single verified airflow figure

A good fit for your job? Check the current price and delivery.

See price on Amazon

The P-630HC is a mobile version of XPOWER's centrifugal mover format. Its exact Amazon listing should be checked for current package details and airflow documentation.

Before you buy

Installation and buying checks

Use these questions to verify the exact configuration. Linked facts are cited; unlisted details stay questions.

  1. Mounting and support

    What mounting method and hardware does the exact unit require?

  2. Clearance and handling

    Do the listed physical details leave enough clearance for installation, adjustment, and service?

  3. Electrical match

    Does the documented electrical information match the planned supply? Confirm the installed unit’s nameplate and installation instructions before connecting it.

  4. Airflow at the job

    Is the listed airflow rated at an operating point that matches the job after placement, obstructions, and system resistance are considered?

  5. Location requirements

    Does the site require an environmental rating or guard? Neither is listed here.

Put 2,980 CFM in context

The XPOWER P-630HC Air Mover with Handle, Wheels, and Carpet Clamp has a listed airflow of 2,980 cubic feet per minute. The table compares this rated volume with example room volumes. It does not measure fresh-air exchange, air speed at your body, or room coverage.

RoomSizeNominal room volumes / hourNominal pass interval
One-car garage22 × 12 × 9 ft · 2,376 ft³75×48 s
Two-car garage22 × 20 × 9 ft · 3,960 ft³45×1.3 min
Workshop40 × 30 × 12 ft · 14,400 ft³12×4.8 min
Warehouse bay100 × 50 × 16 ft · 80,000 ft³2.2×27 min

A circulation fan does not by itself replace indoor air. Exhaust airflow depends on a makeup-air path and system resistance. Use installed outdoor airflow for ventilation calculations.

Formula: airflow × 60 ÷ room volume. CDC explains the ventilation form of this equation; here the input is a catalog rating, so the result is a volume comparison.

Work it out for your own room →

Listing details

What we know about this listing

Listing data was imported on October 31, 2026. Each specification can have a different source-check date; the evidence below is the most precise source information available here.

Sources for 9 listed specifications
  • Motor: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Current: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Speeds: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Cord length: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Unit Weight (lbs) 21; Cord Length 20 ft; Warranty 1 Year Limited”
  • Airflow (high): XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Voltage: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Max speed: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table (high speed) — “Volts / Cycle 115V / 60 Hz; Motor 1/2 HP; Power 5A; Rated Airflow 2980 CFM; Speeds 3; RPM 1,000 / 1,250 / 1,500”
  • Weight: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Unit Weight (lbs) 21; Cord Length 20 ft; Warranty 1 Year Limited”
  • Warranty: XPOWER P-630HC product page · checked Sep 23, 2026 · Specifications table — “Unit Weight (lbs) 21; Cord Length 20 ft; Warranty 1 Year Limited”

Photos illustrate the listed model. Confirm the current variant, included hardware, and finish with the seller before purchase.

Similar air movers

See all →